Lutron Lighting and Shading in Queens
Lutron lighting control and motorized shades for Queens condos and family homes, from glass towers in Long Island City to houses in Forest Hills. Designed, installed, programmed and supported by one team.
Who installs Lutron lighting and shades in Queens?
Nex AV designs, installs and programs Lutron lighting control and motorized shades across Queens, including Long Island City, Astoria, Forest Hills and Jackson Heights. We install HomeWorks, RadioRA 3 and Caséta systems with Palladiom, Sivoia QS and Triathlon shades. Every project starts with a free on-site survey and an itemized proposal, and we prepare any paperwork your condo board requires.
Newer Buildings, Easier Runs
Queens has some of the friendliest housing stock in the city for lighting control. Here is what we usually find in each neighborhood.
Long Island City
New-build condo towersFloor-to-ceiling glass facing Manhattan, which makes solar shades and scene control part of everyday living.
Astoria
Condos and converted buildingsNewer buildings that often wire easily, with condo boards that expect alteration paperwork.
Forest Hills
Single-family homesMore freedom on cable routing, plus better options for outdoor lighting on schedules.
Jackson Heights
Co-ops and prewar buildingsOlder walls where wireless keypads and battery shades avoid opening plaster.
Conduit may already be in your walls
Long Island City and Astoria condo buildings often have conduit already in place. When we spot it during the survey, it lowers installation cost considerably, because cable can be pulled instead of routed through finished walls.
Three Lutron Systems, One Right Fit
The right Lutron system depends on the size of your home and how much you want to control. We recommend one after the survey.
Caséta
For a few rooms or a first step into smart lighting.
- Caséta dimmers and Pico remotes
- Serena battery shades
- Lutron app and voice assistants
- Easy to expand later
RadioRA 3
Whole-home control without opening walls.
- Sunnata keypads and Pico remotes
- Sivoia QS and Triathlon shades
- Works with Control4 and Josh.ai
- Scenes, schedules and remote access
HomeWorks
For larger homes where every room and shade is controlled.
- Palladiom and Alisse keypads
- Palladiom, Sivoia QS and Triathlon shades
- Works with Control4 and Josh.ai
- Deepest design and customization
Learn more on our Lutron page or see Lutron lighting and shading across New York.
Shades for Queens Windows
From skyline glass in Long Island City to bedroom windows in Forest Hills, there is a Lutron shade for every opening.
Solar shades
Cut glare and heat while keeping the skyline or the street view. The everyday shade for living rooms and kitchens with big windows.
Blackout shades
Full darkness for bedrooms and media rooms, often paired with a solar shade on the same window so you can switch between the two.
Battery shades for finished rooms
Lutron Triathlon and Serena shades run on batteries, so finished apartments and co-ops can be motorized without opening walls.
Press a Button, Change the Room
A Lutron keypad replaces a row of switches with scenes. Tap a button to see what each one does.
Dinner
Pendants over the table at 70%, kitchen task lights low, living room at 30% and solar shades halfway down against the evening glare.
- Set from the keypad, app or voice
- Can run on a schedule every evening
Condo and Co-op Paperwork, Handled
Most Queens condo and co-op boards want documentation before any work starts. We prepare it as part of the project, so approvals do not hold you up.
- Alteration agreement submissions
- Certificates of insurance
- Licensed and insured contractor documents
- Work scheduled to permitted hours
- Noise and dust mitigation plans
- Coordination with your architect or designer
Six Steps to Your First Scene
- First callWhich rooms, which windows and your rough budget.
- Free surveyWindows measured, wiring and conduit checked in person.
- ProposalItemized line by line. No surprise fees.
- ApprovalsBoard documents prepared where required.
- InstallMost projects run one to three weeks.
- HandoverTraining, then support whenever you need it.
One Team From Survey to Support
No handoffs between a designer, an installer and a programmer.
Every line itemized before you commit, with no surprise fees.
Programmed for how you actually use each room, not a template.
Add Control4, Josh.ai voice or whole-home audio when you are ready.
What the Free Survey Covers
One visit to your Queens home, then an itemized proposal. No obligation to proceed.
- Every window measured for shades and fabric
- Existing switches, wiring and any conduit checked
- The right system: Caséta, RadioRA 3 or HomeWorks
- What your building or board will require
Serving Queens From Midtown Manhattan
Our team works out of Midtown Manhattan in the Garment District, at 8th Ave and W 38th St, and travels to you for every survey and installation in Queens.
- Address
- 575 8th Ave #1704, New York, NY 10018
- Phone
- +1 646-503-0246
- william@nexavt.com
- Hours
- Mon to Sat, 9 am to 6 pm, Sunday closed
- Serving
- Long Island City, Astoria, Forest Hills, Jackson Heights and all of Queens
Queens Lutron Questions
Do you install Lutron lighting and shades in Queens?
Yes. Nex AV designs, installs and programs Lutron lighting control and motorized shades across Queens, including Long Island City, Astoria, Forest Hills and Jackson Heights.
Is the site survey free in Queens?
Yes. Surveys across Queens are free, with no obligation to proceed. We measure windows, check wiring and any existing conduit, and recommend the right system before sending a proposal.
Can Lutron be installed in a condo without opening walls?
Yes. RadioRA 3 keypads and Triathlon battery shades are designed for finished homes. In many Long Island City and Astoria buildings, existing conduit also makes wired runs much easier.
Will you handle our condo or co-op board paperwork?
Yes. We prepare alteration agreement submissions, certificates of insurance and contractor documentation, and schedule work around permitted building hours.
Which Lutron system is right for my apartment?
Caséta suits a few rooms, RadioRA 3 gives whole-home control without opening walls, and HomeWorks suits larger homes where every room and shade is controlled. We recommend one after the survey.
Does Lutron work with Control4 and voice control?
Yes. RadioRA 3 and HomeWorks integrate with Control4, so lights and shades sit on the same remote and touchscreen as the rest of the home, and Josh.ai adds natural voice control.
How long does a Lutron installation take?
Most projects run one to three weeks depending on scope and access. Custom shade fabrics and board approvals can affect the start date, which we confirm in the proposal.
Can you do outdoor lighting at a Forest Hills house?
Yes. Single-family homes give more freedom on cable routing, so driveway, garden and path lighting can run on Lutron schedules and turn on automatically at dusk.
Ready for Lutron in Queens?
Tell us your address and the rooms you have in mind. We will arrange a free survey and send an itemized proposal.